47
Cutting attachment replacement
Nylon-line cutting head:
Use a genuine Honda replacement cutting head or its equivalent.
Wear heavy gloves to protect your hands when replacing the cutting
head.
To avoid severe personal injury, make sure that the engine switch is
in the OFF position to prevent accidental starting.
3.
LOCKING TOOL HOLE
4 mm HEXAGON WRENCH
CUTTING HEAD
ASSEMBLY
GEAR CASE
Insert a 4 mm hexagon wrench into the locking tool hole to keep the
drive shaft from turning.
Stop the engine and remove the spark plug cap.
Turn the cutting head assembly clockwise to remove it from the gear
case. Replace it with new one.
The line feeding action of the semi-automatic line feed type cutting
head (see page
).
1.
3.
2.
29
10/01/19 17:55:16 3CVK9600_049
