USER'S MANUAL
CHILDREN
NIGHT LIGHT
STOP
NOZZLE POSITION FORWARD
NOZZLE POSITION BACK
INCREASED WATER PRESSURE
REDUCED WATER PRESSURE
● Long press this button for 3 seconds to activate children mode.
When children mode is on,short press this button (whether seated or not) to start children cleaning:
move cleaning for 1 minute;
Level 1 of water pressure, level 4 of nozzle position and level 2 of water temperature.
When children mode off,short press this button to activate children cleaning when seated.
● Short press this key to turn on/off night light.
● Press and hold this button for 3 seconds to turn on/off the smart night light mode. The factory default
setting is on.
Smart night light mode: night light turns on/off according to the ambient light automatically.
● When cleaning, press this key to stop the cleaning function.
● Short press this button, water pressure, nozzle position, water and seat temperature are same with
previous setting. Long press to activate standby mode when power on.
● Press this key to move the nozzle position forward in rear wash, front wash, and children.
There are 4 levels in total. Each press, the nozzle moves forward 1 level.
● Press this key to move the nozzle position back in rear wash, front wash, and children.
There are 4 levels in total. Each press, the nozzle moves back 1 level.
● Press this key to increase spray pressure in rear wash, front wash, and children.
There are 4 levels in total. Each press increases the cleaning intensity by 1 level.
● Press this key to reduce spray pressure in rear wash, front wash, and children.
There are 4 levels in total. Each press reduces the cleaning intensity by 1 level.
NOZZLE POSITION
NOZZLE POSITION
WATER PRESSURE
WATER PRESSURE
REAR WASH
● When the seat senses that the human body is seated, press the rear wash button in the stop or other
mode, the buzzer sounds, the rear wash function is turned on, and it ends automatically after 3
minutes.
● During the cleaning process, press this key again to open or close the move cleaning function.
● If the human body leaves the seat after the function is activated, exit the function.
● When the seat senses that the human body is seated, press the front wash button in the stop or other
mode, the buzzer sounds, the feminine cleaning function is turned on, and it ends automatically after 3
minutes.
● During the cleaning process, press this key again to open or close the move cleaning function.
● If the human body leaves the seat after the function is activated, exit the function.
● Press this key to adjust the water temperature. The water temperature is adjustable in 4 levels. When
the LED is off, the water temperature is the tap water temperature. According to the use environment,
the actual water temperature is about 86~105.8
℉
(30~41
℃
)
.
● Press this key to adjust the seat temperature. The seat temperature is adjustable in 4 levels. When
the LED is off, the seat temperature is the room temperature. According to the use environment, the
actual seat temperature is about 86
~
107.6
℉
(30
℃~
42
℃
)
.
When the human body is seated, the anti-low temperature scald function is automatically turned on
after 15 minutes, and the seat temperature is reduced to level 1.
During the cleaning process, press this button to start Cold & Hot SPA; press it again to stop Cold &
Hot SPA, and at the same time the temperature returns to the normal cleaning state. 5 seconds cold
water and 15 seconds set hot water alternate.
FRONT WASH
WATER TEMP
SEAT TEMP
COLD & HOT SPA
Function Explanation
Water temperature level
Water temperature level
Water temperature
Water temperature
level 1
level 2
level 3
level 4
About 91.4
℉
(33
℃
)
About 102.2
℉
(39
℃
)
About 95
℉
(35
℃
)
USER MANUAL
Homtone
USER MANUAL
Homtone
About 98.6
℉
(37
℃
)
