55
Homewerks.com
WARNING: RISK OF ELECTRIC SHOCK! Ensure the electricity to the wires you are working on is shut off. Either remove
the fuse or turn off the circuit breaker before removing the existing bath fan or installing the new one.
Before removing your current ventilation fan, verify the wall switch box has the required wires necessary for this
installation. These wires are power (black) and neutral (white), as shown in the wiring diagram below. If you do not see
both of these wires, consult a licensed electrician.
Check area above installation location to be sure that wiring can run to the planned location and that duct work can be run and
the area is sufficient for proper ventilation.
Inspect duct work and wiring before proceeding with installation.
Before installation, provide inspection and future maintenance access at a location that will not interfere with installation work.
You may need the help of a second person to install this fan; one person on the attic side and one on the room side.
I
nstallation may vary depending on how the previous bath fan was installed. Supplies necessary for the installation of your bath fan
are not all included; however, most are available at your local home improvement or hardware store.
DIMENSIONS
Ceiling
Opening (L)
Ceiling
Opening (W)
Ceiling
Opening (H)
Housing
Dimension (L)
Housing
Dimension (W)
Housing
Dimension (H)
7-3/4 in.
7-1/2 in.
7-5/16 in.
7-1/2 in.
7-1/4 in.
7 in.
WIRING
All wiring must be connected for full functionality.
Motor
Capacitor
for long
life of
motor
BLUETOOTH® speaker
LED Light
Controller
Fan Housing
Junction Box
Automatic terminal
switch
Fan Switch (Black)
Fan Neutral (White)
Green Wires
Neutral
Switch
Speaker/LED
switch to fan
switch
Neutral to
neutral
Ground
to 120V/60Hz
Fan connection
Fan connection
Grounding connection
WIRING FOR 1 SWITCH OPERATION
BLUETOOTH® speaker
LED Light
Motor
Capacitor
for long
life of
motor
Controller
Fan Housing
Junction Box
Automatic terminal
switch
Speaker/LED Switch (Black)
Light kit connection
Light kit connection
Fan connection
Fan connection
Grounding connection
Speaker/LED Neutral (White)
Fan Switch (Black)
Fan Neutral (White)
Green Wires
Neutral
Switch
Neutral
Switch
Ground
WIRING FOR 2 SWITCH OPERATION
to 120V/60Hz
PREPARATION (continued)
