9
Homewerks.com
This is a one-time pairing to be done after turning on the power source.
1. Turn switch to ON. The white LED light on the fan should be on.
2. Cycle the switch ON & OFF multiple times, pausing one second between each cycle, until the LED night
light on the fan is flashing.
3. While the LED night light is flashing, press LIGHT.
4. The LED night light will stop flashing and appear as solid blue. The switch is now paired with fan and all four
setting buttons on the switch should now be functional.
NOTE: If the LED night light stops flashing and the
white LED light is on the pairing was unsuccessful, repeat steps 2-4.
Any combination of settings can be achieved by individually pressing each setting button, except LED light and
night light. For example, pressing LIGHT and FAN will turn on the exhaust fan and LED light. Pressing LIGHT
and MUSIC will turn on LED light and Bluetooth speaker.
To cycle through the blue and amber night light colors, press the night light button repeatedly.
NOTE:
Should you ever lose pairing between the switch and fan, repeat steps 2-4.
If installing multiple units or you are having an issue pairing the switch to the fan:
A. Make sure all toggle switches are in the OFF position.
B. Cycle the first switch ON and OFF multiple times, pausing one second between each cycle, until the LED night
light on the fan is flashing.
C. While the LED night light is flashing, press MUSIC. The LED night light will stop flashing. Follow steps 1 - 4 above.
D. If connecting another unit, turn the fan off and repeat steps A-C for any remaining fans.
CONNECTING YOUR BLUETOOTH
®
DEVICE TO THE SPEAKER
1. To play your personal music files, you need a wireless BLUETOOTH
®
device.
2. Set your device to a midrange volume before connecting to the speaker.
3. Follow the instructions that came with your BLUETOOTH
®
device to make it discoverable or to set it
to search for other BLUETOOTH
®
accessories. This may involve entering a passkey or PIN (Personal
Identification Number).
4. From the Home screen, choose Settings > BLUETOOTH
®
, to search for the speaker. NOTE: While your
device can maintain multiple pairing records, it can only connect to one accessory at a time. This prevents
your device from sending your data to the wrong BLUETOOTH
®
accessory.
5. Choose the Homewerks
™
speaker, and then enter a passkey or PIN (0000) if prompted.
6. When pairing is complete, use the BLUETOOTH
®
speaker to play audio from your device.
7. Optimal volume setting for the BLUETOOTH
®
speaker is 70% or lower. Settings higher than 70%
may cause sound distortion.
PAIRING LIGHT SWITCH WITH FAN
CARE AND CLEANING
CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning
the breaker off or removing the fuse from the fuse box.
•
See safety information before proceeding. Routine maintenance should be done at least once a year.
• Never use solvents, thinner or harsh chemicals for cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse metal parts in water.
• Do not immerse resin parts in water over 140 degrees Fahrenheit.
• Do not immerse BLUETOOTH
®
speaker in water
