background image

5

Homewerks.com

PREPARATION (continued)

ATTENTION:

The switch included with this ventilation 

fan requires a dedicated neutral wire 

connection. If a neutral line is not 

present, one must be run by a  

qualified electrician.

NOTE:

 This switch is intended to only 

operate independently with this bath 

fan. Connections to other electrical 

fixtures is prohibited and could cause 

electrical issues.
If you require assistance, please call 

1-877-319-3757 before attempting  

switch installation

.

WARNING: RISK OF ELECTRIC SHOCK! Ensure the electricity to the wires you are working on is shut 

off. Either remove the fuse or turn off the circuit breaker before removing the existing bath fan or 

installing the new one.

 

 Before removing your current ventilation fan, verify the wall switch box has the required wires 

necessary for this installation. These supply wires are power (black) and neutral (white), as shown in 

the wiring diagram below. If you do not see both of these wires, consult a licensed electrician.

Check area above installation location to be sure that wiring can run to the planned location and that duct work 

can be run and the area is sufficient for proper ventilation.

Inspect duct work and wiring before proceeding with installation.
Before installation, provide inspection and future maintenance access at a location that will not interfere with 

installation work.
You may need the help of a second person to install this fan; one person on the attic side and one on the room side.

I

nstallation may vary depending on how the previous bath fan was installed. Supplies necessary for the installation 

of your bath fan are not all included; however, most are available at your local home improvement or hardware 

store.

DIMENSIONS 

Ceiling  

Opening (L)

Ceiling  

Opening (W)

Ceiling  

Opening (H)

Housing  

Dimension (L)

Housing  

Dimension (W)

Housing  

Dimension (H)

9-3/8 in.

9-3/8 in.

7-1/2 in.

9-1/4 in.

9-1/4 in.

7-3/8 in.

WIRING

 

All wiring must be connected for full functionality. Do not use metal wall plate with switch.

NIGHT LIGHT

LIGHT

FAN

MUSIC

House neutral/white

Power/black

Ground wire/green

Switch

connection/black

Fan neutral/white

Switch/red

Fan

AC120V/60Hz

Green

Red

White

Black

Summary of Contents for 7130-16-BT

























Reviews: