Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Seat (B) to Back (A) with
Flat Washers (large), Spring Washers (large)
and Head Cap Bolts (long),
tightening bolts only halfway.
(See Figure 1)
Flat Washer (large)
Spring Washer (large)
Head Cap Bolt (long)
STEP 2
Attach Legs (E) to unit with
Flat Washers (large), Spring Washers (large)
and Head Cap Bolts, tightening bolts only halfway.
Flat Washer (large)
Spring Washer (large)
Head Cap Bolt
Figure 1
A
B
E
E
E
E
