Assembly Instructions 2/2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
STEP 1
Attach Seat (A) to Back Frame (G) with
Flat Washers, Spring Washers, Head Cap
Bolts (long) and Head Cap Bolts (short).
(See Figures 1 and 2)
Figure 4
Figure 2
Figure 1
STEP 2
Put end of Stretcher C into hole in
( )
Back Frame.
Slide Leg (E) into position on the unit with
other end of Stretcher C in hole in Leg (E).
( )
Attach Leg (E) to unit with Flat Washers,
Spring Washers and Head Cap Bolts.
(See Figure 3)
Attach Stretcher C to unit with Wood Screws.
( )
(See Figure 4)
Figure 3
Spring Washer
Wood Screw
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt
(long)
Spring Washer
Flat Washer
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt
(short)
Flat Washer
Wood Screw
C
A
F
E
G
D
B
STEP 3
Put end of Stretcher (D) into hole in Back Frame and
end of Stretcher (B) into hole in Leg (F).
Slide Leg (F) into position on the unit with other end of
Stretchers (B) and (D) in holes in Leg (F).
Attach Leg (F) to unit with Flat Washers, Spring Washers
and Head Cap Bolts.
Attach Stretchers (B) and (D) to unit with Wood Screws.
Tighten all Head Cap Bolts and Wood Screws.
