Assembly Instructions 3/3
Head Cap Bolt (short)
Spring Washer
Flat Washer
STEP 3
Place Top (A) upside down on a soft cloth.
Attach the Apron Frame (B) to Top (A)
with Flat Washers, Spring Washers and
Head Cap Bolts, tightening the bolts
only half way. (See Figure 3)
Tighten all Head Cap Bolts used
in this step.
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt
STEP 4
Attach the base unit to top unit
with Flat Washers, Spring Washers,
Head Cap Bolts (short) and
Head Cap Bolts, tightening the bolts
only half way. (See Figures 4 and 5)
Tighten all Head Cap Bolts used in
Steps 2 and 4.
Turn the unit over to its’ upright
position.
B
A
Figure 3
Figure 4
Figure 5
Figure 6
STEP 5
To level the unit, adjust the adjustable levelers on the bottom of unit.
(See Figure 6)
Note: Unit must be level to work properly.
