Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Wrench as the bolts may need to be tightened in the future.
B
A
STEP 1
Place Side Frame (C) on a soft cloth.
Attach Back (A) and Seat (B) to Side Frame (C)
with Flat Washers, Spring Washers and
Head Cap Bolts, tightening bolts only halfway.
(See Figure 1)
STEP 2
Place Side Frame (D)
on a soft cloth.
Attach unit to Side Frame (D)
with Flat Washers, Spring Washers
and Head Cap Bolts,
tightening bolts only halfway.
Tighten all Bolts used in Steps 1 and 2.
Cover all Bolts with Caps.
Cap
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt
Spring Washer
Flat Washer
Figure 1
C
D
