Assembly Instructions 8/9
STEP 15
Level unit by adjusting the adjustable
levelers on bottom of unit. (See Figure 10)
Note: Unit must be level to proceed.
Slide Drawers (N) into position.
Figure 12
Figure 13
UP
Front
Back
Down
Figure 14
Left
Right
STEP 17
If needed, adjust doors up or down by removing the front Wood Screws for Hinge and
loosening slightly the back Wood Screws for Hinge from side panel, adjusting doors up
or down and reinstalling screws. (See Figure 12)
If needed, adjust doors left to right. (See Figure 13)
If needed, adjust doors front to back. (See Figure 14)
Figure 10
STEP 16
Attach Plastic Clips to unit
with Flat Head Screws (short).
(See Figure 11)
Note: Unit must be level
before attaching Plastic Clips.
Figure 11
N
N
N
Flat Head Screw (short)
Plastic Clip
