IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the screws until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Assembly Instructions 2/9
STEP 1
Place Top (A), Base (B), Plinths (C) and Middle Panels (H), (I) on a soft cloth.
Insert Cam Lock Screws into pre-drilled holes in Top (A), Base (B),
Plinths (C) and Middle Panels (H), (I), then tighten. (See Figure 1)
Figure 1
Cam Lock Screw
A
C
C
H
I
B
