Assembly Instructions 2/6
STEP 1
Attach Magnets to Shelf (D)
with Wood Screws into pre-drilled holes,
then tighten. (See Figure 1)
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all bolts until each part is properly assembled.
Keep Hex Wrench and Wrench as bolts and casters may need to be tightened in the future.
STEP 2
Insert Dowels into
pre-drilled holes in Side Panel (B).
Attach Base (E), Shelf (D) and Top (A)
to Side Panel (B) with Head Cap Bolts.
(See Figures 2 and 3)
Figure 1
Wood Screw
Magnet
D
B
D
A
E
Head Cap Bolt
Dowel
Figure 3
Figure 2
