Assembly Instructions 10/10
Figure 8
Figure 9
Up
Front
Back
Down
Figure 10
Left
Right
STEP 16
Attach Top (W) to unit with Head Cap Bolts (middle).
Slide Drawers (P) and (Q) into position.
Note: Supports (V) from 20 09100 Top carton are not used in this assembly.
Head Cap Bolt (middle)
STEP 17
If needed, adjust doors up or down by removing the front Wood Screws (short) and
loosening slightly the back Wood Screws (short) from side panel, adjusting doors up
or down and re-installing screws. (See Figure 8).
If needed, adjust doors left to right. (See Figure 9)
If needed, adjust doors front to back. (See Figure 10)
W
P
Q
Q
Q
