Assembly Instructions 2/7
STEP 2
Plinth
Attach
(H) to Bottom (L), then flip Lock.
(See Figures 2 and 3)
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Cam Lock Screw
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Side Panels (I) and (J), then tighten.
(See Figure 1)
Figure 1
Cam Lock Screw
Figure 2
H
I
J
L
Figure 3
Lock
