Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Insert Cam Lock Screws into
pre-drilled holes in Side Panels (C)
and (D), then tighten.
(See Figure 1)
Cam Lock Screw
C
C
Figure 1
Figure 2
STEP 2
Attach Rail (H) to Side Panel (C) with Cam Lock.
(See Figure 2)
Attach Upright (I) to unit.
Slide Back Panels (J) into position.
Attach Rail (H) to unit with Cam Lock.
Attach Side Panel (D) to unit with Cam Locks.
Cam Lock
H
H
I
J
J
D
D
