Bluetooth Receiver Pairing Steps
1.
2.
3.
4.
5.
6.
Bluetooth Transmitter Pairing Steps
1.
2.
3.
4.
The Bluetooth Receiver will enter into Pairing Mode after factory
reset.
The (R1) & (R2) Indicators will flash alternately.
Activate the Bluetooth function on your Bluetooth A2DP-enabled
mobile device. Search for “HomeSpot aptX BTR XX” and select to
pair.
Note: “XX” refers to a 2 digits identifiers.
Once paired and connected, 1 low tone will be played. The (R1)
Indicator will be turned on.
The Bluetooth Receiver is then ready to receive audio stream
from your mobile device.
Power on your Bluetooth audio receiving device / Bluetooth
Receiver and set it to pairing mode.
On the first use, once powered on, the Bluetooth Transmitter will
be in pairing mode. (T2) and (T4) Indicators will alternate blink
rapidly.
The Bluetooth Transmitter will automatically search for, and
connect to, the closest Bluetooth audio receiving device in pairing
mode.
If the pairing is successful and a connection is made, (T2)
Pairing Indicator will be turned on.
PAIRING
P.8
If your device supports AAC, the (R2) Indicator will be on during
audio streaming. If your device supports aptX or aptX Low Latency,
the (R3) Indicator will be on during audio streaming.
Summary of Contents for HS-BTADP-236LL-BUN128D-UL
Page 11: ...TRANSMITTER LED INDICATORS P 10 ...
