1.
2.
3.
The Bluetooth Receiver and Bluetooth Transmitter is pre-paired to
each other at factory level. Both devices can immediately auto-
connect to each other upon intial power up.
Once powered on, 1 low tone will be played. The Bluetooth
Receiver Indicators (R1) and (R3) will be turned on.
The Bluetooth Transmitter is ready to stream aptX Low Latency
audio to the Bluetooth Receiver, which in turn will output audio to
the connected sound system.
Upon powering up, the Bluetooth Adapter set will try to reconnect to
each other.
If reconnection fails, the Bluetooth Receiver will enter standby mode,
the (R1) indicator will blink slowly. Press once the (R4) Pairing
Button to switch the Bluetooth Receiver into Pairing Mode.
When the Bluetooth Transmitter is in standby mode (i.e. when (T2)
blinks in Blue every 3 seconds) or in OFF mode, press (T1) and the
Transmitter will automatically re-connect to the last connected
device, once it is paired and connected with the Receiver, (T2)
Pairing Indicator will be turned on.
START STREAMING
AUTO-RECONNECT
P.6
Summary of Contents for HS-BTADP-236LL-BUN128D-UL
Page 11: ...TRANSMITTER LED INDICATORS P 10 ...
