If we want to separate the Panasonic switch module with the HSW120, we need to pear the caps in the below picture from the housing
of the HSW120 and then use a screw driver to release the HSW120 connectors from the switch module.
Connection Diagram
Turning On/Off the HSW-120Z
Use any of the below methods to allow power through or cut power from the HSW-120Z.
●
Use the Panasonic Wall panel to control the Light1 and Light 2 on/off.
●
Pressing the button on the Wall switch, which is connected to the DI1/DI2 will be able to spin the Light 1, Light 2 on/off.
●
Through the usage of Z-Wave commands built into Z-Wave certified controllers and gateways. (The specific Z-Wave commands
supporting this function are the Basic Command Class and Multilevel Switch Command Class.) Please consult the operation
manual for these. controllers for specific instructions on controlling the HSW-120Z.
Change Mode on the External Switch/Button Control
- 3 -
