SERVICE
1. Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel may
result in a risk of injury.
2.
Accessories must be rated for at least the speed recommended on
the tool warning label. Wheels and other accessories running over
rated speed can fly apart and cause injury.
Important!: Do not operate the polisher until you have inspected each
part. If any part is missing or damaged, do not use it. Return the pol-
isher to the place of purchase. See WARRANTY.
ENVIRONMENTALLY SAFE DISPOSAL OF YOUR BATTERIES
! WARNING !
If any of your batteries break or crack, they may or may
not leak, do not attempt to recharge and use it, dispose of it immedi-
ately and replace it with a new one.
Never try to repair a battery
. Batteries used in the tool contain a toxic
material called
Cadmium
.
! WARNING !
Batteries contain toxic materials and must be disposed
in a specific manners so there is no contamination of the environment.
Before you can dispose of any worn or damaged batteries, contact
your local Environmental Protection Agency (EPA) for instructions and
information pertaining to Nickel-Cadmium Batteries.
BATTERY SAFETY RULES
Follow these simple rules to avoid injury and risk of fire, electrical
shock, and explosion.
• Do not attempt to open any battery.
• Do not put the batteries in the regular trash.
• Do not incinerate any battery.
• If a leak appears, the released electrodes are corrosive, wash your
hands and do not get the material in your eyes or mouth.
• Dispose your batteries to a certified disposal center.
• The battery pack not in use shall be far from other metal objects
such as paper clips, coins, keys, nails, screws or other small metal
objects that may connect one terminal. The short of the one termi-
nal may cause sparks, burn and even a fire.
• The battery pack of the polisher can only be charged by the
charger supplied in this kit, other types may burst causing fire or
other danger.
• Only battery pack supplied in this kit can be used for the polisher.
Other types may cause fire or other dangers.
• Make sure the switch is in off position before inserting the battery
pack into the polisher to avoid damages caused by accidental start-
ing.
• Carrying tools with your finger on the switch invites accident.
• Ensure battery is disposed of safely as instructed by the manufacturer.
• Don’t store battery pack in a container with other metal objects
such as nails, coins, etc.
• Don’t short the battery pack; a battery short can cause a large cur-
rent flow, overheating, possible burn and even a fire.
• Don’t expose battery pack to water or rain.
• Don’t carry battery pack in a pocket containing any metal objects.
• Don’t store the battery pack in locations where the temperature
may reach or exceed 50°C (182°F).
• Don’t incinerate the battery pack even if it is severely damaged or
is completely worn out.
• If batteries leak, avoid contact with the liquid. Should contact occur,
wash immediately with soap and water.
• The polisher should always be off before inserting or removing the
battery pack.
BATTERIES AND BATTERY CHARGER
• Unplug your battery charger when you are not charging your
batteries.
• If your battery pack is hot, let it cool before recharging.
• Do not charge batteries in direct sunlight.
• Keep your battery charger clean, do not allow materials in the cav-
ity of the charger, and while
UNPLUGGED
wipe out the cavity with a
dry cloth, never use water or solvents.
CHARGING THE BATTERY
Caution:
Charge only 18 Volt battery packs with your charger
supplied in this HOME RIGHT
®
kit, other types may burst causing dam-
age or personal injury.
• Plug the charger into a 120V AC power source and insert the bat-
tery pack into the charger receptacle pocket. Make sure that the
polarity rib in the battery pack is aligned with the polarity slot in
the charger. There are plus and minus symbols on either side of
the battery pack that designate the polarity of the terminals. These
symbols are on the same sides as their respective symbols on your
charger. In order for the charger to work properly the pack must
be fully inserted into the charger receptacle pocket. When fully
inserted into the pocket a light will come on.
• Charge your batteries only with the HOME RIGHT supplied battery
charger.
• Use only (120 volts, 60 HZ AC only) regular household voltage.
• Don’t charge battery pack when temperature is below 10°C (50°F)
or above 40°C (104°F).
• Don’t attempt to use a step-up transformer, an engine generator or
DC power receptacle.
• Don’t allow anything to cover or clog the charger vents.
• Before connecting the charger to a power source (receptacle
or outlet), be certain the voltage supplied is the same as power
requirements specified on the charger. Mismatched voltage source
can result in serious injury to the user. When in doubt, don’t plug in
the charger.
• Don’t operate charger if damaged in any way. Don’t operate charger
with damaged cord. Return product to factory. To prevent damage
to cord when disconnecting charger from power source, grip plug
body when removing it from a receptacle.
• Unplug charger from outlet before attempting maintenance or
cleaning.
• Don’t substitute charger of any other type. Doing so may result in
risk of electrical shock, fire or injury to persons.
• Keep charger free of foreign matter.
• Your new battery pack is not fully charged when received; therefore,
charging is necessary prior to use.
• When not in use the battery pack can be left on charger (indicated
by the red light) without any adverse effect; the batteries can-
not be “over-charged”. However, if the battery pack is not going
to be used for an extended period of time the charger should be
unplugged from its power source.
• If you need to charge more than one battery pack, allow 15
minutes between charges.
SPECIFICATIONS OF THE AC/DC CHARGER ADAPTER
Output voltage:
21V DC 400mA
Charging time:
5 to 7 hours
VELOCITY WAXER
™
P/N C800669
3
IMPORTANT SAFEGUARDS
