page 6 of 16
ALFA IN a.s. ©
www.alfain.eu
Burns
Noise
NOTE
It is forbidden to operate a machine with damaged insulation of the
welding torch or supply cable.
Never operate the machine taken down or damaged covers.
It is forbidden to operate the machine in wet environments and
outdoors in rain or snow.
Ensure proper grounding clamping pliers, which also reduces the risk
of electric shock.
Use prescribed protective utilities, keep them dry.
Arc welding produces intense electric and magnetic emissions that
may interfere with the proper function of cardiac pacemakers, hearing
aids, or other electronic health equipment. Persons who work near
plasma arc cutting applications should consult their medical health
professional and the manufacturer of the health equipment to
determine whether a hazard exists.
Never aim the torch against the eyes, body or other person.
3. CONDITIONS OF USE
This equipment must only be used by qualified personnel.
During installation, any electric work must only be carried out by trained
personnel.
Do not expose the plasma machine to direct sunlight or to rain or snow.
This equipment conforms to protection rating IP23S.
Place the machine the way that the cooling air can enter the vents
without restriction to. It is necessary to ensure that no impurities,
especially metal particles are not drawn into the machine.
Welding machine in terms of interference suppression is intended
primarily for industrial premises. In the case of use of other areas may be
need for special measures (see EN 60974-10).
The machine must be protected against
a)
moisture and rain and snow
b)
mechanical
damage
c)
draft and any ventilation of neighbouring machine
d)
excessive overloading - crossing technical parameters
e)
rough
handling
4. TECHNICAL DATA
ALF 181
