![background image](http://html.mh-extra.com/html/homenetwerks/3073-201-bt/3073-201-bt_manual_2153906004.webp)
4
www.homewerksww.com
INSTALLATION INSTRUCTIONS
CHARGING THE SPEAKER
1. Remove existing showerhead. Clean threads
of shower arm.
2. Apply thread sealant tape (included) on
threads of the shower arm in a clockwise
direction.
3. Install showerhead as shown to shower arm
and hand tighten. DO NOT OVERTIGHTEN.
Turn on water and check for leaks. Tighten if
necessary.
Note:
Fully charge the speaker unit before 1st use. Speaker will need to be charged after 5 hours of
continuous use. ON/OFF button will flash red when power is low. It takes 2 hours to fully charge the
speaker.
1. Connect USB charging cable to the charging
port at the bottom of the speaker.
2. Insert the other end into a USB port on a
computer or into a USB wall charger (not
included).