HomeMatic HmIP-WRCC2, Mounting Instruction And Operating Manual

Page: 37 / 50

37
Start-up
activated for 3 minutes.
You can manually start the teach-in mode for
another 3 minutes by pressing the system button
(C) shortly (see figure 3) .
• Your device will automatically appear in the
Homematic IP app.
• To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
Therefore, see the sticker supplied or attached to
the device.
• Wait until the connection is completed.
• If teaching-in was successful, the LED
(C) lights
up green. The device is now ready for use.
• If the LED lights up red, please try again.
• Allocate the device to a room and give the device
a name.
• In the app, select in which application you want
to use your device (light control and shutter
control, for example).