39
Start-up
• Use the supplied screws and plugs
(L)
to fasten
the mounting plate to the wall
(see figure 6)
.
• Attach the clip-on frame
(A)
to the mounting plate.
• Place the remote control
(B)
back into the frame
(see figure 1)
. Make sure that the clips on the
mounting plate latch into the openings on the
electronic unit.
Information on installation with flush-mounting boxes:
• For installation with flush-mounting boxes, ple-
ase use the bore holes
(K)
.
Note. Only to be installed by persons with the re-
levant electro-technical knowledge and experi-
ence!
Incorrect installation can put
• your own life at risk;
• and the lives of other users of the electrical sys-
tem.
Incorrect installation also means that you are running the
risk of serious damage to property, e.g. because of a fire.
You may be personally liable in the event of injuries or
damage to property.
Contact an electrical installer!
