52
Start-up
spring latches
(E)
upwards (
see fig. 3
).
• Make sure that the spring latches are completely
latched and that the device is seated solidly on
the rail.
• Place the transformer next to the floor heating
actuator onto the DIN rail (
see fig. 4
).
• Latch the transformer by pressing the spring latch
upwards (
see fig. 4
).
• Make sure that the spring latch engages properly
and that the device is securely seated on the rail.
6
Start-up
6.1
Installation instructions
Please read this entire section before starting to
install the device.
Please note! Only to be installed by persons
with the relevant electro-technical knowledge
and experience!*
Incorrect installation can put
• your own life at risk;
• and the lives of other users of the electrical sys-
tem.
Incorrect installation also means that you are running the
risk of serious damage to property, e.g. because of a fire.
Summary of Contents for HmIP-FAL24-C6
Page 3: ...1 A G B E C H D F ...
Page 4: ...2 3 K I J ...
Page 5: ...4 5 ...
Page 6: ...6 7 Selecttaste drücken Systemtaste drücken press select button press system button ...
