53
8.2 Command not confirmed
If a receiver does not confirm a command (at least one
when more than one have been taught), the device
LED is illuminated in red when the transmission is
complete.
The error will then be found with the receiver:
• Receiver not accessible
• Receiver cannot execute command (load failure,
mechanical blockage, etc.)
• Defective receiver
8.3 Feedback by the device LED
The feedback signals apply for operation with and
without the center.
Radio transmission
LED feedback
Meaning
Orange flashing or red and
green (according to success)
Radio transmission
Green LED
all actuators have confir
-
med the (last) bidirectional
command
Red flashing
at least one actuator has
not confirmed the last (bidi
-
rectional) command
Summary of Contents for HM-Sec-SC-2
Page 59: ...59...
