39
Hazard information
The device described is part of the building
installation. The relevant national standards
and directives must be taken into consideration
during planning and set-up. The device has
been designed solely for operation on a
230 V/50 Hz AC supply. Only qualified
electricians (to VDE 0100) are permitted to
carry out work on the 230 V mains. Applicable
accident prevention regulations must be
complied with whilst such work is being carried
out. To avoid electric shocks from the device,
please disconnect the mains voltage (trip the
miniature circuit-breaker). Ignoring installation
instructions can cause fires or other hazards
(see sec. “6 Installation” on page 46).
Please do not open the device. It does not
contain any parts that can be maintained by the
user. In the event of an error, please have the
device checked by an expert.
The device must only be operated indoors. This
device is to be operated indoors only and keep
away from the influences of humidity, dust and
sunshine or other radiating heat sources.
