Hazard information
Function and device overview
6
7
Always lay cables in such a way that they do not become a risk
to people and domestic animals.
The device has not been designed to support safety discon-
nection. The load is not isolated from the mains.
Before cleaning the device, unplug it from the socket outlet.
Use a dry linen cloth to clean the device. If the device is
particularly dirty, you can slightly dampen the cloth to clean it.
Do not use any detergents containing solvents for cleaning
purposes. Make sure that no moisture will ingress into the
housing.
Using the device for any purpose other than that described in
this operating manual does not fall within the scope of intended
use and shall invalidate any warranty or liability. This also
applies to any conversion or modification work. The device is
intended for private use only.
Do not connect multiple plug adapters into one another.
Devices with electronic power supply units (e.g. TV or high
voltage LED light sources) are no ohmic loads. They can
generate inrush currents with more than 100 A. Switching such
kind of loads may lead to premature wear of the actuator.
The device may only be operated whitin residential buildings.
3
Function and device overview
The HomeMatic Wireless Switch Actuator 1-channel, plug adapter ena-
bles switching of connected devices via radio.
The device can be easily mounted without tools - after the device has
been plugged in, it is immediately ready for use. The wireless switch
actuator enables easy operation directly on the device. Alternatively,
multiple HomeMatic devices (e.g. HomeMatic remote controls) can be
assigned. Information about the current operating status or error mes-
sages is given be the device LED.
In connection with the HomeMatic Central Control Unit CCU2 the wire-
less switch actuator can be individually configured via the WebUI user
interface and the full range of functions can be used. The maximum
switch on and off duration as well as a delay time for switching con-
nected devices on and off can be individually adjusted.
B
A
(A) -
Channel button
(B) -
Device LED
