HomeMatic HM-LC-Dim1T-FM, Installation And Operating Manual, Page: 22 / 27

42 43
7.3 Operating functions after teach-in
After the teach-in has been performed, simple operator
functions are available via the taught-in transmitter.
Press and release the button: ON/OFF, press and hold
down the button: Dim. Press the button as follows to
trigger the corresponding response:
Button Response
Press and release "ON"
button ON
Press and release
"OFF" button OFF
Press and hold down
"ON" button Dim up
Press and hold down
"OFF" button Dim down
Depending on the taught-in control element, switching
can be carried out in toggle mode and dimming carried
out using single button mode.
The device can also be operated directly using the
external pushbutton.
8 Resetting to the as-delivered state
To reset the actuator to the as-delivered state, put the
device into teach-in mode using the external button
(hold down for at least 4 seconds) after switching the
mains voltage off and back on again. When the device
is in teach-in mode, hold the channel button down for
at least 4 seconds again. If the device LED flashes
quickly, this indicates that the actuator is being reset.
9 Device LED feedback
9.1 Flashing codes
Various actuator states are indicated by the channel
LED flashing:
Slow flashing Teach-in mode
Fast flashing Reset
One long flash, n brief
flashes (depending on
the type of error)
Error