28
29
1 Information about this manual
Read this manual carefully before starting to use your
HomeMatic components.
Keep the manual so you can refer to it at a later date
if you need to!
If you hand over the device to other persons for use,
please hand over the operating manual as well.
Symbols used:
Attention!
This indicates a hazard.
Note. This section contains additional important
information.
2 Hazard information
The actuator that is described is part of a
building installation. When planning and setting
up electrical installations, the standards and
guidelines that are applicable in the country in
which the equipment is installed must be
complied with.
The device has been designed solely for
operation on a 230 V/50 Hz AC supply. Only
qualified electricians (to VDE 0100) are
permitted to carry out work on the 230 V mains.
Applicable accident prevention regulations
must be complied with whilst such work is
being carried out.
Please do not open the actuator. It does not
contain any parts that can be maintained by the
user. In the event of a fault, please call our
service department.
The device must only be operated indoors.
Protect the device from the effects of damp and
dust, as well as solar or other methods of heat
radiation.
When connecting to the device terminals, take
the permissible cables and cable cross
sections into account.
Please take the technical data (in particular the
maximum permissible switching capacity of the
relay and the type of load to be connected) into
account before connecting a load! All load data
Summary of Contents for HM-LC-Dim1T-FM
Page 26: ...50 51...