51
Restore factory settings
4 seconds, until the LED lights up green. If the
LED lights up red, please try again.
• Release the system button to finish the proce-
dure.
The device will perform a restart and the WLAN Access
Point is being reset.
6.2
Resetting and deleting the entire
installation
To reset the factory settings of the entire installation, the
procedure described above must be performed twice in
succession, within 5 minutes:
• Reset the WLAN Access Point as described above.
• Wait at least 10 seconds until the LED
(A)
perma-
nently lights up blue.
• Immediately afterwards, perform the reset for the
second time by disconnecting the WLAN Access
Point from the power supply again and repeating
the previously described steps.
After the second restart, your system will be reset.