39
Troubleshooting
Error codes and flashing sequences” on page
41).
Once the battery has been inserted, the motion detector
will perform a self-test (approx. 2 seconds). Afterwards,
initialisation is carried out. The LED test display will indi-
cate that initialisation is complete by lighting up orange
and green.
Never recharge standard batteries. Do not throw
the batteries into a fire. Do not expose batteries
to excessive heat. Do not short-circuit batteries.
Doing so will present a risk of explosion.
Used batteries should not be disposed of with
regular domestic waste! Instead, take them to
your local battery disposal point.
10
Troubleshooting
10.1 Weak batteries
Provided that the voltage value permits it, the motion de-
tector will remain ready for operation also if the battery
voltage is low. Depending on the particular load, it may
be possible to send transmissions again repeatedly, once
the batteries have been allowed a brief recovery period.
If the battery voltage is too weak, this will be displayed
in the Homematic IP app and directly on the device via
Summary of Contents for HmIP-SMI55
Page 2: ...2 3 4 5 6 H I K J K J L 7 ...
Page 50: ...48 Technical specifications ...
