32
Mounting
If you are working with a stone wall, drill the
marked two 5 mm holes and insert the plugs
supplied. If you are working with a wooden wall,
you can pre-drill 1.5 mm holes to make screws
easier to insert.
• Use the supplied screws and plugs
(L)
to fasten
the mounting plate to the wall
(see figure 4)
.
• Attach the clip-on frame
(A)
to the mounting
plate.
• Place the electronic unit
(B)
back into the frame
(see figure 1)
. Make sure that the clips on the
mounting plate latch into the openings on the
electronic unit.
Information about installation on flush-mounted
boxes:
• For installation on a flush-mounted box, please
use the bore holes
(K)
(see fig. 3)
Please note! Only to be installed by persons with
the relevant electro-technical knowledge and
experience!*
Incorrect installation can put
•
your own life at risk;
•
and the lives of other users of the electrical system.
Summary of Contents for HmIP-SMI55
Page 2: ...2 3 4 5 6 H I K J K J L 7 ...
Page 50: ...48 Technical specifications ...