30
Mounting
The mounting location should be protected from
the effects of weather.
5.2
Wall mounting
For the wall mounting with the supplied screws and plugs
please proceed as follows:
• Choose a site for installation (see “5.1 General
notes on installation” on page 29).
• Remove the cap
(A)
(see fig. 2
).
• Position the light sensor without cap
(A)
at the
desired location site and mark the bore holes
(E)
with a pen (
see fig. 3
).
• Now drill the bore holes.
If you are working with a stone wall, drill the
marked two 5 mm holes and insert the plugs sup-
plied. If you are working with a wooden wall, you
can pre-drill 1.5 mm holes to make screws easier
to insert.
• Insert the plugs into the bore holes.
• Position the light sensor and insert the screws
(
see fig. 4
).
• Do not yet place the cap
(A)
.
