Page 4
SAFETY
To reduce the risk of electrical shock, use only round-
jacketed extension cords approved for outdoor use,
such as cords of type SW-A, SOW-A, STW-A,
STOW-A, SJOW-A, SJTW-W, or SJTOW-A. Since
this tool is double insulated, you may use a 2-wire
extension cord (an extension cord without a ground).
However, you may also use a 3-wire extension cord
(an extension cord with a ground) that has a NEMA-
type connector (parallel blade, U ground). Extension
cords are available from your local retailer.
Be sure to use a cord that is heavy enough to carry
the current that your product will draw. The correct
cord size depends on cord length and amperage
rating (see figures below). An undersized cord set will
cause a drop in line voltage resulting in loss of power
and overheating. Use of an improper extension cord
could result in a risk of fire and electric shock. If an
extension cord must be used, make sure:
a. That pins on plug of extension cord are the same
number, size and shape as those on the plug on the
charger.
b. That the extension cord is properly wired and in
good electrical condition; and
c. That the wire size is large enough for the AC
ampere rating of the product as specified below:
Cord Length (Feet)
25'
50'
100'
Cord Size (AWG)
16
14
12
Note: AWG = American Wire Gage
To reduce the risk of electrical shock, this product has
a polarized plug (one blade is wider than the other)
and requires the use of a polarized extension cord.
This product’s plug fits into a polarized extension cord
in only one way. If the plug does not fit fully into the
extension cord, reverse the plug. If the plug still does
not fit, obtain a correct polarized extension cord. Use
of a polarized extension cord requires use of a
polarized wall outlet. This product’s plug fits into a
polarized wall outlet in only one way. If the plug does
not fit fully into the wall outlet, reverse the plug. If the
plug still does not fit, contact a qualified electrician to
install the proper wall outlet. Do not change the
product plug, the extension cord receptacle, or the
extension cord plug in any way.
Ground Fault Circuit Interrupter (GFCI) protection
should be provided on the circuits(s) or outlet(s) used
for this product. Receptacles with built-in GFCI
protection are available and may be used.
Inspect extension cords for deterioration, cuts, or
cracks in the insulation. Repair or replace the cords if
any defects appear.
A nameplate on the product indicates the unit’s
voltage. Never connect the product to an AC voltage
that differs from this voltage.
MAINTENANCE RULES
Maintain the product with care. Follow instructions for
changing accessories. Keep the product dry, clean,
and free from oil and grease.
Release the trigger, allow the motor to stop, and
unplug the product before making adjustments or
repairs.
Do not use the product if parts have been damaged.
Check the product to make sure that it will operate
properly and perform the intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, and any other condition that may
affect the unit’s operation. Inspect the unit’s power
connection. Any part that is damaged should be
properly repaired or replaced by a Homelite autho-
rized service center.
Keep the product clean of grass clippings and other
materials that may become lodged in the cutting lines.
Never douse or squirt the product with water or any
other liquid. Keep handles dry, clean and free from
debris. After each use, clean with a soft, dry cloth.
SERVICE RULES
Service on this product must be performed by quali-
fied repair personnel only. Service or maintenance
performed by unqualified personnel could result in
injury to the user or damage to the product. Such
service may also void your warranty.
Use only identical replacement parts when servicing
the product. Follow the instructions in the Mainte-
nance section of this manual. Use of unauthorized
parts or failure to follow maintenance instructions may
create a risk of shock, serious injury to the user, or
damage to the product. Such use may also void your
warranty.
STORAGE AND TRANSPORTATION RULES
Stop the motor when you are waiting to cut or when
you are walking from one cutting location to another.
Store the product inside in a dry place. Store the
product up high or lock it up to prevent unauthorized
use or damage. Keep the product out of the reach of
children.
Secure the product when transporting it.
Save these instructions.
Refer to them frequently
and use them to instruct others who may use this
product. If you loan someone this product, loan these
instructions also.