Page 4 – English
Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy
enough to carry the current your product will draw. A wire
gauge size (A.W.G.) of at least 14 is recommended for an
extension cord 50 feet or less in length. If in doubt, use the
next heavier gauge. The smaller the gauge number, the
heavier the cord. An undersized cord will cause a drop in
line voltage resulting in loss of power and overheating.
Do not point the blower nozzle in the direction of people
or pets.
Never place blower on any surface, except a hard, clean
surface when motor is running. Gravel, sand, and other
debris can be picked up by the air inlet and thrown at
the operator or bystanders, causing possible serious
injuries.
Never run the unit without the proper equipment attached.
Always ensure the blower tube is installed.
When not in use, blower should be stored indoors in a
dry, locked up place—out of the reach of children.
Maintain tool with care. Keep fan area clean for best
and safest performance. Follow instructions for proper
maintenance.
SPECIFIC SAFETY RULES
Do not attempt to clear clogs from tool without first
unplugging it.
Do not pull or carry by cord, use cord as a handle, or pull
cord around sharp edges or corners. Keep cord away
from heated surfaces.
Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
To reduce the risk of electrical shock, do not expose to
rain, do not use on wet surfaces. Store indoors.
If the power supply cord is damaged, it must be replaced
only by the manufacturer or by an authorized service
center to avoid risk.
Protect your lungs. Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the risk
of serious personal injury.
Save these instructions.
Refer to them frequently and
use them to instruct others who may use this power tool.
If you loan someone this power tool, loan them these
instructions also.
IMPORTANT SAFETY INSTRUCTIONS
Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
Do not handle plug or appliance with wet hands.
Do not put any object into openings. Do not use with any
opening blocked; keep free of dust, lint, hair, and anything
that may reduce air flow.
Use only identical manufacturer’s replacement parts and
accessories. Use of any other parts may create a hazard
or cause product damage.
Do not use with damaged cord or plug. If appliance is
not working as it should, has been dropped, damaged,
left outdoors, or dropped into water, return it to a service
center.
In a double insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means
is provided on a double insulated appliance, nor should
a means for grounding be added to the appliance.
Servicing a double insulated appliance requires extreme
care and knowledge of the system and should be done
only by qualified service personnel. Replacement parts
for a double insulated appliance must be identical to the
parts they replace.
For household use only.
SAVE THESE INSTRUCTIONS
Summary of Contents for UT42101
Page 29: ...Page Página 11 NOTES NOTAS ...
