background image

2

3

WARNING:

READ AND UNDERSTAND ALL INSTRUCTIONS. 

Fail-

ure to follow all instructions listed below, may result in 
electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

Do not allow children or untrained individuals to use this 
unit.

Never start or run the engine inside a closed area; breath-
ing exhaust fumes can kill.

Wear eye protection which is marked to comply with ANSI 
Z87.1 as well as hearing protection when operating this 
product.

Keep  all  bystanders,  children,  and  pets  at  least  50  ft. 
away.

Wear heavy long pants, boots, and gloves. Do not wear 
loose fitting clothing, short pants, jewelry of any kind, or 
go barefoot.

To reduce the risk of injury associated with objects being 
drawn  into  rotating  parts,  do  not  wear  loose  clothing, 
scarves, neck chains, and the like.

Secure long hair so it is above shoulder level to prevent 
entanglement in any rotating parts.

Do not operate this unit when you are tired, ill, or under 
the influence of alcohol, drugs, or medication.

Do not operate in poor lighting.

Keep all parts of your body away from any moving parts 
and all hot surfaces of the unit.

Wear a face filter mask in dusty conditions to reduce the 
risk of injury associated with the inhalation of dust.

Check the work area before each use. Remove all objects 
such as rocks, broken glass, nails, wire, or string which 
can be thrown or become entangled in the machine.

Keep firm footing and balance. Do not overreach. Over-
reaching can result in loss of balance or exposure to hot 
surfaces.

Never operate the unit without a spark arrestor screen; 
this screen is located inside the muffler.

Product users on United States Forest Service land, and 
in some states, must comply with fire prevention regula-
tions.  This  product  is  equipped  with  a  spark  arrestor; 
however, other user requirements may apply. Check with 
the federal, state, or local authorities in your area.

Before storing, allow the engine to cool.

Empty fuel tank and restrain the unit from moving before 
transporting in a vehicle.

To reduce the risk of fire and burn injury, handle fuel with 
care. It is highly flammable.

Do not smoke while handling fuel.

Mix and store fuel in a container approved for gasoline.

Mix fuel outdoors where there are no sparks or flames.

Select bare ground, stop engine, and allow to cool before 
refueling.

Loosen fuel cap slowly to release pressure and to keep 
fuel from escaping around the cap.

Tighten the fuel cap securely after refueling.

Wipe spilled fuel from the unit. Move 30 ft. away from 
refueling site before starting engine.

Never attempt to burn off spilled fuel under any circum-
stances.

Use only identical manufacturer’s replacement parts and 
accessories. Use of any other parts may create a hazard 
or cause product damage.

Maintain  the  unit  per  maintenance  instructions  in  this 
Operator’s Manual.

Inspect the unit before each use for loose fasteners, fuel 
leaks, etc. Replace damaged parts.

GENERAL SAFETY RULES

SPECIFIC SAFETY RULES

Always hold the control handle in your right hand. Refer 
to the Operation section later in this manual for addi-
tional instructions.

To reduce the risk of hearing loss associated with 
sound level(s), hearing protection is required.

To reduce the risk of injury associated with contact-
ing rotating parts, stop the engine before installing or 

removing attachments. Always disconnect the spark 
plug before performing maintenance or accessing any 
movable parts.

Do not point the blower nozzle in the direction of 
people or pets.

Never run the unit without the proper equipment 
attached. Always ensure the blower tubes are installed.

Summary of Contents for BACKPACKER II UT08072



















Reviews: