background image

10

11

FILLING THE TANK

WARNING:

Always stop the engine before filling the fuel tank. Never 
add fuel to a machine with a running or hot engine. Move 
at  least  30  ft.  from  the  refueling  area  before  starting 
engine. Do not smoke while filling the tank.

n

  Clean the surface around the fuel cap to prevent con-

tamination.

n

  Loosen  the  fuel  cap  slowly  by  turning  counterclock-

wise.

n

  Pour the fuel mixture carefully into the tank.

n

�  Clean and inspect the fuel cap gasket before replacing 

the fuel cap.

n

  Replace the fuel cap and tighten it by turning it clock-

wise.

n

  Wipe spilled fuel from the product.

��

n

  Move at least 30 ft. away from refueling area before start-

ing the product.

NOTE: 

It  is  normal  for  smoke  to  be  emitted  from  a  new 

engine during first use.

WARNING:

Check for fuel leaks. A leaking fuel cap is a fire hazard 
and must be replaced immediately. If you find any leaks, 
correct  the  problem  before  using  the  product.  Failure 
to do so could result in a fire that could cause serious 
personal injury.

WARNING:

Do  not  allow  familiarity  with  tools  to  make  you  care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.

WARNING:

Always  wear  safety  goggles  or  safety  glasses  with 
side  shields  when  operating  this  tool.  Failure  to  do 
so could result in objects being thrown into your eyes
resulting in possible serious injury.

WARNING:

Gasoline is extremely flammable and explosive. A fire or 
explosion from gasoline will burn you and others.

MIXING THE FUEL

This product is powered by a 2-cycle engine and requires 
premixing gasoline and 2-cycle oil. The mixture should be at 
a 50:1 ratio, using Premium Exact Mix™ 2-cycle engine oil. 
If Premium Exact Mix™ 2-cycle engine oil is not available, 
use a high quality 2-cycle engine oil, mixed at a 50:1 ratio. 
See chart later in this section.

To mix the fuel:

�1.  Use  a  clean  container  that  is  approved  for  use  with 

gasoline.

�2.  Mix  the  Premium  Exact  Mix™  2-cycle  engine  oil  with 

unleaded  gasoline  in  the  container,  according  to  the 
instructions on the oil package.

This  engine  is  certified  to  operate  on  unleaded  gasoline 
intended  for  automotive  use  with  an  octane  rating  of  87 
([R + M] / 2) or higher. Do not use automotive oil or 2-cycle 
outboard oil.

NOTE: 

Premium Exact Mix™ fuel mixture will stay fresh up 

to 30 days. DO NOT mix quantities larger than usable in a 
30 day period.

OPERATION

PREMIUM EXACT MIX™ (50:1)

  GASOLINE 

OIL

  1 Gallon (US) 

2.6 oz.

 

1 Liter 

20 cc (20 ml)

Summary of Contents for BACKPACKER II UT08072



















Reviews: