The disposer is self-cleaning and scours itself with each use.
●
NEVER put corrosive substances or chemical into the disposer, do not pour
bleach or drain cleaners, run water before & after you use the disposer.
Any enquiries please contact:
visit the website:
www.homelektro.com
●
Under normal usage, our disposer won’t require any special care. If an odor
released, run orange or lemon rinds through the disposer. Appropriate amount
of ice cubes sprinkled with a little household scouring powder will also work. For
more details, please refer to the owner’s manual.
F. CARE AND MAINTENANCE
THE MOTOR IS PERMANENTLY LUBRICATED FOR LIFE. DO NOT ATTEMPT TO
LUBRICATE YOUR DISPOSER.
a.
Remove the sink stopper and turn on a medium flow of cold water.
b.
Turn the switch to ON.
c.
Food items should be fed into the EcoSink gradually. Stuffing lots of food scrap
into the disposer unit all at once is likely to make it jam & shutdown.
d.
Before turning the disposer off, let the water and the disposer run for
approximately 25 seconds after shredding stops. This assures that all waste is
thoroughly flushed through the trap and drain.
e.
EcoSink should only be run with cold water. Do not use hot water to run the disposer.
E. OPERATING INSTRUCTION
For Continuous Feed Model
G. TROUBLESHOOTING TIPS
SAFETY NOTE:
Helpful Hints
The disposer is ruggedly built to give you
years and years of trouble-free service. It will
handle all normal food wastes–BUT it will not
grind and dispose items such as tin cans,
bottles and bottle caps, glass, china,
leather, cloth, crockery, rubber, string,
feathers, large bones, clam or oyster shells.
These are waste materials and belong in
the trashcan or trash compactor.
Be sure the disposer is empty before using
the dishwasher so it can drain properly.
You may want to leave the stopper in
the drain when not in use to prevent
utensils and foreign objects from falling
into the disposer.
TO SPEED UP FOOD WASTE DISPOSER...
Item such as bones, fibrous husks and corn
husks, which require considerable grinding
time. For this reason, we recommend you
to cut or break up bones, melon rinds,
grapefruit skins and corn cobs or place
them in the trash can or trash compactor.
A B
D
C
An EcoSink is an appliance that can be installed in a kitchen sink drain to grind
& dispose the food materials.
• Before investigating and or Resetting, you MUST
disconnect the power supply
• The overload control prevents the motor from
operating should overloading occur.
• When overloaded, the motor will stop automatically.
Why EcoSink food waste disposer not starting?
Make sure the unit is plugged into a live outlet. Check that the outlet is working properly
by testing it with other electric appliance. If the problem persists, unplug power cord or
turn the power switch to "OFF" position. Check to see if turntable will rotate freely by using
plastic, wooden or non-magnetic implements. If turntable rotates freely, check re-set
button to see it has been tripped(Re-set button is red and located opposite to discharge
elbow, near the bottom). Push button in until it clicks and remains depressed. If the re-set
button has not been tripped, check for short or broken wire and electrical power switch
connecting to the disposer. If electrical components are intact, the unit may have
internal problems that require service or replacement.
Why there is abnormal sound when operating EcoSink food waste disposer?
This is usually caused by accidental entry of a spoon, bottle cap or other foreign object.
Turn both disposer and water tap off. After the disposer stopped, remove objects with
plastic, wooden or non-magnetic implements. If electrical components are intact, the
unit may have internal problems that require service or replacement.
How to fix a jam in EcoSink food waste disposer?
Unplug power cord or turn the power switch to "OFF" position, then check for any foreign
object lodged between the turntable and grind ring. Dislodge the object by rotating
turntable with plastic, wooden or non-magnetic implements. If no foreign object is
present, there may be internal problems that require service or replacement.
Why leaking occurs?
If the unit leaks at the top, it may be due to:
i) Improper seating of sink flange (gasket centering, putty or tightening).
ii) Support ring not tightened properly.
iii) Defective or improperly installed cushion mount.
If unit leaks at the discharge elbow, it may be due to improper tightening of outlet
elbow.
If EcoSink food waste disposer breaks down, can I still use my sink?
Breakdowns are rare but if our disposer did fail to work, you could still use your sink
normally. Water will easily flow through the holes in the shredder plate and down the
drain, even if the disposer has been deactivated.
What if I can't solve my own problem?
Call EcoSink service agencies, and we are ready at anytime to help you to repair or
replace your food waste disposer.
