Homedoor.uk Standard Barlock, Fitting And Operating Instructions

Page: 5 / 14


The Barlock
®
is suitable for all hinged and unhinged doors that open inwards and outwards,
right or left (Page 8 – Fig. 1-2)

Doors with panelling and/or border trimmings must be individually adjusted (use lock
under-lays if necessary). Please contact us if you are not sure how to install it.

The standard design is suitable for doors opening inwards and outwards (door panel width of
838mm to 1030mm and/or door panel thicknesses of 35 to 50 mm)

For doors opening outwards or thick doors, special accessories and advice are available

The Barlock
®
can be fitted with a thumb-turn cylinder or a door half-cylinder (without the
possibility of closing from the outside).

The Barlock
®
can also be equipped with different brand of cylinders following our advice
and recommendation.

We recommend to fit the Barlock
®
beneath the door handle (Page 8 - Fig. 3).

The fitting for 2 pieces of Barlock
®
is recommended in the event of increased safety
requirements. The second one is then fitted above the door handle (Page 8 - Fig. 4).

The closing direction can be adjusted accordingly to set the gear-tracks position (Page 12).
For more information and advice please contact us on our website www.homedoor.uk or email
to info@homedoor.uk
III. Field of application of the
Barlock
®
,
including special accessories
www.homedoor.uk
5