7
HOW TO FILL
CAUTION:
Before filling unit with water, turn the power off and unplug the unit from the outlet.
NOTE:
Always use two hands to carry the water tank.
HOW TO USE
Display shows:
Programmed Humidity Setting (pictured),
Timer Setting, Warm or Cool Mist
Selection, and Mist Output Level
Power ON/OFF Button
Timer
Night Light / Display Light
Programmable Humidistat
Mist Temperature
Mist Output Level
Programmable Humidistat Setting
POWER ON/OFF BUTTON
Plug unit in to a 120 volt AC electrical outlet. Press the POWER button to turn unit on.
MIST OUTPUT LEVEL
Mist adjusts from the lowest output 1 to the highest output 5. To increase the mist output, press the
+ Button. The corresponding Mist Level will be lit on the display. To decrease mist output, press the –
Button.
MIST TEMPERATURE SETTING
To change the mist temperature from Cool to Warm Mist, press the Mist Temperature Button. WARM
will be illuminated on the display. To change the mist temperature from Warm to Cool Mist, press the Mist
Temperature Button again. COOL will be illuminated on the display.
NOTE:
Once Warm Mist is selected, it will take approximately 20 minutes to heat up before the mist
becomes warm.
