Assembly
Unpack the product and check to make sure
everything is included (Fig 1).
Table-top
Adhere the 4 foam adhesive feet to the bottom of the unit (Fig 2).
This will help to stabalize the unit and prevent furniture from being
scratched.
Wall-Mount
1. Determine the location and height you are going to hang the unit.
NOTE:CHECK THE INTENDED WALL LOCATIONS FOR STRUCTURAL
STRENGTH. INJURY TO PERSONS AND DAMAGE TO UNIT AND/OR
MOUNTING SURFACE MAY RESULT IF UNIT IS PULLED FROM THE
SURFACE. TO LIMIT THE LIKELIHOOD OF SUCH INJURY OR DAMAGE,
MOUNT UNIT ON A STRUCTURAL WALL.
2. Using the position of the mounting holes on the back of the unit,
mark the position on the wall where the two holes will be drilled.
3. Drill two holes that accommodate the anchors provided.
You may use a 7-32 inch drill bit.
4. Insert the wall anchors into the two holes.
5. Insert the screws into the wall anchors and tighten with a screwdriver.
6. Place the unit on the wall.
Instructions for Use
1. Attach the A/C adaptor jack to the base of the unit (Fig 1).
2. Plug the cord into a 120V household outlet.
3. To use the Color Program press the POWER button (Fig 3):
• Once for FLOW
• Twice for NOMAD
• A third time for GEOMETRICS
A corresponding LED will illuminate to indicate the program selected.
4. To adjust the speed press the SPEED button (Fig 3):
• Once for SLOW
• Twice for MEDIUM
• A third time for FAST
A corresponding LED will illuminate to indicate the speed selected.
NOTE: When switching programs the speed of your choice will be
retained until the power is turned off.
5. To turn on the auto-timer press the TIMER button (Fig 3):
• Once for 15 minutes
• Twice for 30 minutes
• A third time for 60 minutes
A corresponding LED will illuminate to indicate the time selected.
NOTE: When switching programs the time of your choice will be retained until the
power is turned off.
6. When finished, turn off The Color Cube by continuing to press the POWER button
until no LED’s are illuminated. NOTE: This unit has an auto shut-off. If the auto-
timer feature has not been selected this unit will turn off after 90 minutes.
Maintenance
To Store:
You may leave the unit on display, or you can store it in its box or a cool, dry place.
To Clean:
Wipe off dust with a damp cloth. NEVER use liquids or abrasive cleansers to clean.
4
5
Figure 1
Figure 2
Figure 3
Control Panel
Screw (2)
Anchor (2)
Adhesive
Feet (4)
Adaptor
Mounting
Holes
A/C Jack
Flow
Nomad
Geometrics
Fast
Medium
Slow
60 Minutes
30 Minutes
15 Minutes
Power
Speed
Timer
NOTE: THE
UNIT WILL
SHUT-OFF
AFTER 90
MINUTES IF
THE TIMER
IS NOT
SELECTED
LT300_ib_1 5/4/04 9:05 AM Page 5
