5. Press the
or
on your iPod/iPhone to go to the next or previous
track.
6. To turn unit off, press the POWER
BUTTON. The iPod/iPhone will
continue charging in the dock.
Listening to a non-
docking iPod or other
portable audio devices
If you are using an iPod without a
docking port, other MP3 player, or
other portable audio device, you can play it through the
SoundSpa Fusion via the LINE IN located on the back of the-
unit (Fig. 9).
1. Plug one end of the Connection Cable (included) into the
headphone or line-out jack on your audio device and the other end of the
Connection Cable into the SoundSpa Fusion LINE IN, located on the back
of the unit.
2. Press the POWER BUTTON on the unit to turn it on (Fig. 1).
3. Toggle through the AUDIO BUTTON on the unit until you reach the
auxiliary mode. The AUX ICON (Fig 2) will appear in the right side of the
clock, to indicate that the auxiliary mode has been selected.
4. Turn on and play external audio device.
5. Turn on VOLUME KNOB (Fig 1) on the unit to adjust the system volume.
Note: You may need to adjust the volume on external device also.
6. To turn off the unit, press the POWER BUTTON on the top of the unit.
Note: You may need to turn off your external audio device as well.
1 0
Listening to Nature Sounds
1. Press the POWER BUTTON on the unit to turn it on (Fig. 1).
2. Select the Sounds button to toggle through the different nature sounds
(Fig 1). They will be shown on the bottom of the LCD display, below the
time. (FIg. 2)
3. Turn the VOLUME KNOB on the unit to
adjust the volume (Fig. 1).
4. To turn off the nature sounds, press the
POWER BUTTON to turn the unit off, or
switch the audio mode by pressing the
AUDIO BUTTON (Fig. 1).
Note: When the unit is turned on, it will always default
to the
last mode used.
Listening to the Radio
FM Antenna
Extend FM wire antenna fully for best FM reception (do not strip, alter or
attach to other antennas).
AM Antenna
Snap the AM loop antenna into the base provided. Next, plug the AM
loop antenna into the connecter located on the back of the unit for best
AM reception (Fig. 10).
1. Press the POWER BUTTON on the unit to turn it on (Fig. 1).
2. Toggle through the AUDIO BUTTON to play the radio
(Fig. 1).
The RADIO ICON will appear on the right side of the clock (Fig. 2).
1 1
Figure 10
Figure 9
SS-6510_A.qxd 2/22/08 1:26 PM Page 11
