5
1
1
2
3
2
3
Power Button
To turn on the massage functions, first press the
POWER button. The L.E.D. indicator will illuminate
and confirm your selection. To turn off the
massage functions, simply press the button again.
The L.E.D. indicator will blink while the Shiatsu
massage mechanism returns to its lowest point
and then it will turn off.
Mode Button
Choose from 3 preset programs where the
massage travels up and down in a specific area
of the back, either Full Back, Upper Back or
Lower Back. To select a program, simply press
the Mode button and the L.E.D. will illuminate
the active program. Continue to press the Mode
button until the desired program is selected.
Heat Button
For soothing heat when massage is on, simply
press the heat button and the corresponding
red L.E.D. light will illuminate. To deselect, press
the button again and the corresponding L.E.D.
light will turn off. For your safety, heat cannot be
turned on if massage is not selected.
Kneading Massage
Shiatsu is a deep kneading circular massage.
This unit features a massage mechanism that
travels up and down the back of the cushion.
NOTE: When “POWER” button is pressed for
first-time use, the moving mechanism will
automatically move to the lowest position before
starting a massage program.
After initial use, mechanism will always park
at lowest position. See note below regarding
parking.
NOTE: The moving massage mechanism always
“parks” or finishes in its lowest position. It
will continue to this position after the power
has been turned off. If the electrical supply
is interrupted, when power is restored, the
mechanism will “park” or move to its lowest
position.
NOTE: There is a 15-minute auto shut off on the
unit for your safety.
