power Button
To turn the massage pillow on, press the
power button once; press again to turn on the
heat function with massage; the third press
turns the unit off.
power supply Cord
The Shiatsu Lumbar Massage Cushion is
powered by a 120 V power cord.
note:
There is a 20 minute auto shut-off on the unit
for your safety.
shiatsu massage
Shiatsu is a deep kneading circular massage.
This unit features a spot shiatsu massage
mechanism that works a specific area.
soothing Heat
For a more relaxing massage.
Convenient and portable
Perfect for the use at home or in the office.
6
7
Shiatsu Lumbar
Massaging Cushion
Maintenance
to store
Place massager in its box or in a safe, dry, cool place. Avoid contact with sharp edges or
pointed objects which might cut or puncture the fabric surface. To avoid breakage, do not
wrap the power cord around the unit. Do not hang the unit by the hand control cord.
to Clean
Unplug the unit and allow it to cool before cleaning. Clean only with a soft, slightly damp
sponge. Never allow water or any other liquids to come into contact with the unit.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, gasoline, kerosene,
glass / furniture polish or paint thinner to clean.
• Do not attempt to repair the Shiatsu Lumbar Massaging Cushion.
There are no user serviceable parts. For service, send the
unit to the HoMedics address listed in the warranty section.
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
Note:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user
authority to operate the equipment.
