4
5
Instructions for Use
To reduce the risk of electric shock, this appliance is equipped with a polarized plug (one blade
wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to
install the proper outlet.
DO NOT
change the plug in any way.
1. Plug adaptor into a 120 volt AC outlet and plug the receptacle end into the input jack,
located along the handle of the neck massager.
2. Place massager around neck (Fig. 2) or area of back you wish to massage. Convenient
straps help assist in easy positioning and intensity control (Fig.1). See page 6 for
instructions on the use of the controller.
Maintenance
To Store
Place massager in its box or in a safe, dry, cool place. Avoid contact with sharp edges or
pointed objects which might cut or puncture the fabric surface. To avoid breakage,
DO NOT
wrap the power cord around the unit.
DO NOT
hang the unit by the power cord or flex handles.
To Clean
Unplug the unit and allow it to cool before cleaning. Spot clean only with a soft, slightly damp
cloth. Never allow water or any other liquids to come into contact with the unit.
•
DO NOT
immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass / furniture polish or paint
thinner to clean.
•
DO NOT
attempt to repair the Shiatsu Deluxe Neck & Shoulder Massager. There are no
user serviceable parts. For service, call the Consumer Relations telephone number listed
in the Warranty Section.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE:
HoMedics is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Fig. 1
Fig. 2
