4
5
INSTRUCTIONS FOR USE
1. Plug the 12 volt auto adapter into your vehicle’s 12V DC outlet and
plug the receptacle end into the input jack, located along the side
of the cushion.
2. Slip the massage cushion straps over your seat.
3. Press the power button on the product controller, and choose heat
to activate soothing heat, or choose a massage zone to begin
vibration massage.
4. When you have selected the vibration zone you would like to use,
press the corresponding button on the product controller. Choose
from Low or High vibration intensity by pressing the vibration zone
button once for Low, and again to activate vibration on High.
5. To turn the unit off, simply press the power button once.
Note
: Heat and Vibration massage may be used at the same time,
or they may be used independently.
MAINTENANCE
TO STORE
Place massager in its box or in a safe, dry, cool place. Avoid contact with sharp edges or pointed
objects which might cut or puncture the fabric surface. To avoid breakage, do not wrap the power
cord around the unit. Do not hang the unit by the controller cord.
TO CLEAN
Unplug the unit and allow it to cool before cleaning. Clean only with a soft, slightly damp sponge.
Never allow water or any other liquids to come into contact with the unit.
• DO NOT immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass/furniture polish, paint thinner
to clean.
• DO NOT attempt to repair the massager. There are no user serviceable parts. For service, call the
Consumer Relations telephone number listed in the warranty section.
Note: An automatic shut-off function after 15 minutes is provided to ensure safety.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
