background image

7

NOTE:

When selecting the heat feature with
massaging action, there will be a slight
decrease in the strength of the massage
output. This adjustment is perfectly normal
and should not be interpreted as a defect.

6

Pressure
Activated
Switch

Soothing Heat

10 Massage Motors

10 Motor Full Body Massager

with

Heat

Power Adaptor

This massager is
powered by a
custom 120 volt AC
home adaptor. 

Massage Strength

Choose the intensity of your massage with
three options of massage strengths: low (L),
medium (M), and high (H). L.E.D. lights
correspond to your selection. The default
setting is medium. To change the strength of
your massage, simply press the button again.

Power Button

To turn on the massage
functions, press the
POWER button. The
L.E.D. indicator above it
will illuminate and
confirm your selection.
To turn the massage
functions off, simply
press the button again
and the L.E.D. indicator
will turn off.

Targeted 
Massage Zones 

Zone buttons activate
motors to massage
specific areas: upper
back, middle back,
lower back, thighs and
legs. Customize your
massage by choosing
one specific area, any
combination of areas or
all five at once. To
select a massage area,
simply push the button
and the corresponding
L.E.D. light will
illuminate. To deselect,
simply push the button
again and the
corresponding L.E.D.
lights will turn off.

Heat

Soothing, penetrating heat is activated by
pushing the heat button. To turn heat off,
simply push the button again. A glowing
L.E.D. light indicates that heat is on.

Massage Functions

This product incorporates 4 pre-programmed
massage functions that can be easily selected
by pressing the corresponding button. Once
activated, you can move from one function to
another by simply pressing another function key.

All Motor Massage

Activates all 10 motors for a total massage
experience. This is the default setting when
the unit is powered on.

Pulse Massage

Repeating pulses of massage relief

Side-to-Side Massage

From your left side to your right, back and forth

Mix Massage

An invigorating mix of the other programs

Massage Speed

Choose the speed at which your custom
programmed massage travels in the Pulse,
Side to Side and Mix programs. There are 3
options: low (L), medium (M) and high (H)
and corresponding L.E.D. lights will indicate
your selection. The default setting is medium.
To change the speed of your massage simply
press the button.

NOTE: The heat function is pressure
activated. The heat action will not function
unless pressure is applied to the back of
the cushion. Once pressure is removed, the
heat will stop. For safety purposes heat will
only function when massage is activated.

Summary of Contents for MMP-300









Reviews: