INSTRUCTIONS FOR USE:
1. Carefully remove all contents from the packaging and inspect the product to make sure all components have been received.
2. Place mirror on an even surface.
3. Adjust the mirror to either normal or magnified viewing. To do so, swivel the mirror to the viewing side of your preference while firmly holding
down the base.
4. Ensure batteries are correctly inserted (see below).
5. To switch on turn the dimmer switch clockwise. A ‘click’ can be heard when the LED light is switched on and the knob can then be rotated
further clockwise to increase the light intensity, upon reaching maximum intensity the knob will not rotate any further. To decrease the light
intensity, turn anti-clockwise. To switch off, turn anti clockwise until the ‘click’ sound is heard.
Note:
The mirror casing may be hot after prolonged use. Be cautious when adjusting the mirror face.
Inserting the batteries
1. Open battery cover on base of mirror by pulling the tab in the direction indicated.
2. Insert 4 ‘AA’ batteries as directed on the inside of the compartment.
3. Replace battery cover.
GB
I
7
PRODUCT FEATURES:
• Rotating dimmer switch for variable light intensity.
• Soft glare-free & shadow-free viewing
• Two-sided mirror with normal and 7x magnification
• Stable, non-slip base
• Satin Nickel Finish
• 17.5cm Mirror Diameter
• Long Life LED Light Source
• Battery powered – use 4 AA batteries
• Mirror Measures 22cm L x 14.3 cm W x 35cm H
360º pivot
Rotating dimmer switch
MIR8150X10-EU-1217-01.qxp_Layout 1 26/11/2018 10:56 Page 7
Downloaded from www.vandenborre.be
