1 0
Listening to a non-docking iPod or other
portable audio devices
If you are using an iPod without a docking port, other MP3 player, or other
portable audio device, you can play it through the iSoundSpa Max via
the Aux Jack (Fig. 6) located on the back of the unit.
1. Plug one end of the Connection Cable (included) (Fig. 1) into the
headphone or line-out jack on your MP3 device and the other end of the
Connection Cable into the iSoundSpa Max Aux jack, located on the back of
the unit (Fig. 6).
2. Press the POWER BUTTON (Fig. 1) on the unit to turn it on.
3. Toggle through the AUDIO BUTTON (Fig. 1) on the unit until you reach the
auxiliary mode. The AUX ICON will appear on the right side of the LCD
display to indicate that the auxiliary mode has been selected (Fig. 2).
4. Turn on and play your MP3 device.
5. Use the VOLUME KNOB (Fig. 1) on the unit to adjust the system volume.
Note: You may need to adjust the volume on your MP3 device also.
6. To turn off the unit, press the POWER BUTTON.
Note: You also need to turn off your MP3 device.
Listening to the Radio
Extend FM wire antenna fully for best FM reception (do not strip, alter or attach
to other antennas). Snap the AM loop antenna into the base provided. Next,
plug the AM loop antenna into the connecter located on the back of the unit for
best AM reception (Fig 7).
1. Press the POWER BUTTON (Fig. 1) on the unit to turn it on.
2. Toggle through the AUDIO BUTTON (Fig. 1) to play the radio. The RADIO
ICON will appear on the right side of the LCD display to indicate that the
radio is on (Fig. 2).
3. Press the AM/FM BUTTON (Fig. 4) located on the back of the unit to select
AM or FM band. The FM ICON will appear on the left side of the LCD to
indicate FM radio is selected; there is no AM indicator.
4. Turn the SET +/- KNOB (Fig. 1) on the unit to tune in the desired station.
5. Turn the VOLUME KNOB (Fig. 1) on the unit to adjust the system volume.
6. To turn off the unit, press the POWER BUTTON.
1 1
Figure 7
Figure 6
iPod
®
Shuffle
Connection
Cable
Aux