Installing Instructions
1. Remove demineralization cartridge from packaging and let it soak in water for 10 minutes.
2. To release the tank from the unit, place your fingers with your palm facing upward into the recess in the
tank handle. Press the tank release button with your thumb (Fig.3).
3.
Place 1 demineralization cartridge down onto post and into the matching slot in the humidifier base
(Fig.11).
4. Place the tank back on the base (Fig.8).
5. Press the tank handle into the base of the humidifier. You will know that the tank is locked into place when
the locking mechanism clicks and the tank release button is in a raised position (Fig.9).
CLEANING AND CARE
CAUTION:
Before cleaning the unit, turn power off and unplug unit from the outlet.
Tank Cleaning
Remove the tank from the base by placing your fingers with your palm
facing upward into the recess in the tank handle. Press the tank release
button with your thumb and lift the water tank out and away (Fig.12).
Unscrew the tank cap; wipe the tank with a soft cloth then wash it with
clean water.
Suggestion:
Clean the water tank once every two to three weeks,
depending on your water conditions.
Ultrasonic Nebulizer Cleaning
Put small amount of mild dish soap on the surface of the ultrasonic
nebulizer, then pour in some water and soak for 5 minutes. Brush clean
with soft bristle brush (not included) and rinse.
Surface Cleaning
Clean the surface of the unit with a clean damp soft cloth.
8
G
B
Fig.12
Fig.13
Fig.14
Fig.15
IB-HUM-WM75-0311-01_Layout 1 06/05/2011 14:39 Page 8
All manuals and user guides at all-guides.com
